News

  • Do you know the catalytic cracking process?

    Catalytic cracking is a process in which high-temperature cracking of petroleum hydrocarbons is carried out in the presence of a catalyst to produce low-carbon olefins such as ethylene, propylene, butylene, and at the same time, producing light aromatic hydrocarbons. Due to the presence of the catalyst, catalytic cracking can lower the reaction temperature, increase the yield of light olefins and the yield of light aromatic hydrocarbons, and increase the flexibility of the distribution of the cracked product. General characteristics 1. Catalytic cracking is the result of the interaction between the carbocation reaction mechanism and the free radical reaction mechanism. The proportion of ethylene in the cracked gas product is greater than the proportion of ethylene in the catalytic cracking gas…
    Read more
  • Operation of silent expansion agent for daily use

    Operation of silent expansion agent for daily use The temperature is getting higher and higher, and due to improper operation, it is highly probable that the expansion agent will operate at high temperatures. The solution is as follows: 1. Select a suitable temperature type expansion agent according to the temperature of the construction site. 2. Holes above 50mm increase the possibility of injection 3. It is possible to spray holes that are too shallow. The hole depth is at least 80 cm and the hole depth is no more than 4 m. 4. If the object in the hole is water-absorbent, the silent expansion agent will heat up too quickly, which may increase the possibility of spraying. 5. If the…
    Read more
  • What are the points to be aware of static pulverizers?

    What are the points to be aware of static pulverizers? (1) Starting from the rock-breaking mechanism, a high-performance static breaker suitable for underground coal mines was developed to make its operation, reaction time, pressure and release process meet the requirements. (2) Development and improvement of crushing and grouting equipment. (3) Improve drilling construction technology and improve drilling equipment according to the specific requirements of construction. (4) The circuit breaker is not a dangerous item. Therefore, in the purchase, transportation, storage, use, without any restrictions. (5) The construction process is safe. Explosives do not generate vibration, air shock waves, flying stones, noise, toxic gases and dust. (6) The structure is simple. When the crushing agent is mixed with water, it can…
    Read more
  • RIBO-CRACK EXPANSIVE MORTAR EXPORTED TO INDIA

    Read more
  • Static crushing agent surpasses the ordinary crushing agent to achieve better results

    Static crushing agent surpasses the ordinary crushing agent to achieve better results   In fact, this static crushing agent is a kind of inorganic compound mainly composed of calcium oxide after calcining at high temperature.Among them, some admixtures are added together to grind into some non-explosive crushing powder materials with high expansion performance.A brief introduction to the static crushing agent, this thing is with the increase of the expansion pressure, the rock will have a crushing process.There is a crack in the process, and there is growth, and the opening is growing.This is the difference between the mechanism of rock breaking by static crushing agents and by ordinary explosives.You can assume that you have a hole in an infinitely large…
    Read more
  • HOW TO USE EXPANSIVE MORTAR Ribo-Crack

    HOW TO USE Ribo-Crack Ribo-Crack is a Non-explosive, Non Toxic Chemical Demolition Agent that safely and silently cracks rocks and concrete in three easy steps: Drill, Mix, Pour.     PREPARATION BEFORE USING Ribo-Crack First measure the temperature of the jobsite, demolition agent, water, stone/concrete and container to ensure temperatures are in accordance with compliance requirements. Demolition agent Clean and cold water Plastic or metal bucket Beater or wooden rod for mixing Safety goggles Rubber gloves Dust proof mask (recommended) Helmet (recommended) Thermometer (recommended) DRILLING Drill holes using an air hammer drill and appropriate drill bit specific to the rock and concrete type. Holes should be drilled no further than 30-60cm (1 ft – 2ft) apart. In reinforced concrete recommended no more…
    Read more
  • Introduction to the features of EXPANSIVE MORTAR

    Characteristics: 1. Convenient construction, can be applied directly on the original wall without screeding. 2.the insulation effect is better than the rubber powder polyphenyl particles. 3. high temperature resistance, can withstand high temperatures of 1200 °C. 4. Non-volatile substances in case of fire. 5.very low water absorption, to ensure its excellent insulation and anti-aging properties. 6. It can dry quickly and improve the construction efficiency. 7. non-toxic, tasteless, and environmentally friendly. Vitrified microbead insulation mortar properties 1. The comprehensive performance of the product is good, the early strength is improved quickly, and the secondary plastering time is shortened. 2. can be directly applied to the dry wall. 3. Overcoming the phenomenon that the volume loss rate of the rubber powder…
    Read more
  • Untitled

    RIBO INDUSTRY, a Specialized manufacturer and exporter for Non Explosive Expansive mortar (Demolition agent) and Drilling tools. Was founded in 2008, at the Industry Zone of Hezhou City in China. We started with OEM brand and build our own brand (Ribocrack) in 2013 year.   With high effect and stable quality, Ribocrack got a high reputed in the area of Europe, South American, Middle east and Asia. It’s has been used successfully in quarrying, rock cracking and building construction project.   Trust us! We will be your ideal partner in stone cracking products with strong support from our experienced sales team and Research and development department.
    Read more
  • About the use of silent breaker

    The main purpose: (1) Cutting and crushing of rocks: mining such as granite, marble, bluestone, limestone, jade, iron ore; rock excavation of tunnels and channels, subways and other underground construction. (2) Demolition and crushing of (reinforced steel) concrete buildings: such as columns, beams, walls, piers, dams, foundation demolition of large equipment, etc. 2. Main features: (1) Safety: There is no vibration, no noise, no flying stones, no dust, no harmful gases during the process of cracking objects. Especially the ideal crushing tool in a non-broken environment. (2) Controllable: It can design different drilling holes according to different needs of customers to achieve the desired cutting or breaking effect. (3) High efficiency: especially mining of mineral materials, the damage rate is…
    Read more
  • Fireproof sound absorbing mortar

    1. Overview: Fireproof sound absorbing mortar is composed of special sound absorbing ore, adhesive and professional construction method; does not contain any asbestos, mineral fiber, glass fiber and plant fiber; non-toxic, non-radioactive, non-irritating, fireproof A1 grade, fire endurance 2 hours, strong weather resistance, pressure resistance, strong adhesion, resistance to collision, acid and alkali erosion, friction, water vapor and harsh environment, excellent sound absorption performance, and can allow surface ventilation and use of high pressure water and Cleaner cleaning. 2. use: Fireproof sound absorbing mortar is the most superior performance and the most cost-effective sound-absorbing and noise-reducing material at present. It is widely used in: a. Highway tunnels, especially urban underpasses b. Subway station c. Railway station d. underground garage e.…
    Read more
INQUIRY NOW